Rust Finish | Pureco

Pureco Rust Finish is a 2 part process. Plus Sealing.

Part 1 – Pureco Rust Finish Paint

Part 2 – Pureco Rust Finish Activator

Part 3 – Pureco Matte Sealer

How to use

Part 1 – Stir contents thoroughly before and during use with a broad, flat stirrer, using an upward action, you must mix the iron particles in that may have sunk to the base. Can be brushed or rolled on, can be used over any colour paint if you wish. use a disposable brush preferably not synthetic, apply 2 coats. Allow 6 hours between coats, once the second coat is touch dry, you can move to Part 2.

Part 2 – apply 1 coat of rust finish activator over touch dry rust paint finish after 30 minutes, mist water over the surface, keeping the surface moist for at least 2 hours. For an advanced rust finish you can keep misting for up to 4 days, to speed up the process you can add salt to your spray bottle. once you have achieved your desired rust finish proceed to Part 3.

Part 3 – sealing with our Pureco Matte Sealer must be applied to halt the rusting process and seal your finish.